EG2008

Permanent URI for this community

https://diglib7.eg.org/handle/10.2312/264

Browse

Now showing 1 - 20 of 117

Accurate Shadows by Depth Complexity Sampling
(The Eurographics Association and Blackwell Publishing Ltd, 2008) Forest, Vincent; Barthe, Loic; Paulin, Mathias
The accurate generation of soft shadows is a particularly computationally intensive task. In order to reduce rendering time, most real-time and offline applications decorrelate the generation of shadows from the computation of lighting. In addition to such approximations, they generate shadows using some restrictive assumptions only correct in very specific cases, leading to penumbra over-estimation or light-leaking artifacts. In this paper we present an algorithm that produces soft shadows without exhibiting the previous drawbacks. Using a new efficient evaluation of the number of occluders between two points (i.e. the depth complexity) we either modulate direct lighting or numerically solve the rendering equation for direct illumination. Our approach approximates shadows cast by semi-opaque occluders and naturally handles area lights with spatially varying luminance. Furthermore, depending on the desired performance and quality, the resulting shadows are either very close to, or as accurate as, a ray-traced reference. As a result, the presented method is well suited to many domains, ranging from quality-sensitive to performance-critical applications.
An Adaptive Contact Model for the Robust Simulation of Knots
(The Eurographics Association and Blackwell Publishing Ltd, 2008) Spillmann, Jonas; Teschner, Matthias
In this paper, we present an adaptive model for dynamically deforming hyper-elastic rods. In contrast to existing approaches, adaptively introduced control points are not governed by geometric subdivision rules. Instead, their states are determined by employing a non-linear energy-minimization approach. Since valid control points are computed instantaneously, post-stabilization schemes are avoided and the stability of the dynamic simulation is improved.Due to inherently complex contact configurations, the simulation of knot tying using rods is a challenging task. In order to address this problem, we combine our adaptive model with a robust and accurate collision handling method for elastic rods. By employing our scheme, complex knot configurations can be simulated in a physically plausible way.
Adaptive Remeshing of Non-Manifold Surfaces
(The Eurographics Association, 2008) Zilske, Michael; Lamecker, Hans; Zachow, Stefan; Katerina Mania and Eric Reinhard
We present a unified approach for consistent remeshing of arbitrary non-manifold triangle meshes with additional user-defined feature lines, which together form a feature skeleton. Our method is based on local operations only and produces meshes of high regularity and triangle quality while preserving the geometry as well as topology of the feature skeleton and the input mesh.
Advanced Algorithms in Medical Computer Graphics
(The Eurographics Association, 2008) Klein, Jan; Bartz, Dirk; Friman, Ola; Hadwiger, Markus; Preim, Bernhard; Ritter, Felix; Vilanova, Anna; Zachmann, Gabriel; Theoharis Theoharis and Philip Dutre
Advanced algorithms and efficient visualization techniques are of major importance in intra-operative imaging and image-guided surgery. The surgical environment is characterized by a high information flow and fast decisions, requiring efficient and intuitive presentation of complex medical data and precision in the visualization results. Regions or organs that are classified as risk structures are in this context of particular interest. This paper summarizes advanced algorithms for medical visualization with special focus on risk structures such as tumors, vascular systems and white matter fiber tracts. Algorithms and techniques employed in intra-operative situations or virtual and mixed reality simulations are discussed. Finally, the prototyping and software development process of medical visualization algorithms is addressed.
Advanced Material Appearance Models
(The Eurographics Association, 2008) Dorsey, Julie; Rushmeier, Holly; Sillion, Francois; Maria Roussou and Jason Leigh
This tutorial will cover the foundational elements of advanced material appearance models. For many years appearance models in computer graphics focused on general models for reflectance functions coupled with texture maps. However, over the past few years it has been recognized that even very common materials such as hair, skin, fabric, and rusting metal require more sophisticated models to appear realistic. In the tutorial we will begin by briefly reviewing basic reflectance models and the use of texture maps. We will then describe some common themes in advanced material models that include combining the effects of layers, groups of particles and or fibers. We will survey the detailed models necessary needed to model materials such as (but not limited to) skin (including pigmentation, pores, subsurface scattering), plants (including internal structure affecting scattering and characteristic shapes) and paints (including color flop and sparkle effects in automotive paints). In the next section of the tutorial we will treat the modeling of complex appearance due to aging and weathering processes. A general taxonomy of these effects will be presented, as well as methods to simulate and to capture these effects. The tutorial will close with a look at current trends in material modeling research.
Agile Spectrum Imaging: Programmable Wavelength Modulation for Cameras and Projectors
(The Eurographics Association and Blackwell Publishing Ltd, 2008) Mohan, Ankit; Raskar, Ramesh; Tumblin, Jack
We advocate the use of quickly-adjustable, computer-controlled color spectra in photography, lighting and displays. We present an optical relay system that allows mechanical or electronic color spectrum control and use it to modify a conventional camera and projector. We use a diffraction grating to disperse the rays into different colors, and introduce a mask (or LCD/DMD) in the optical path to modulate the spectrum. We analyze the trade-offs and limitations of this design, and demonstrate its use in a camera, projector and light source. We propose applications such as adaptive color primaries, metamer detection, scene contrast enhancement, photographing fluorescent objects, and high dynamic range photography using spectrum modulation.
Apparent Greyscale: A Simple and Fast Conversion to Perceptually Accurate Images and Video
(The Eurographics Association and Blackwell Publishing Ltd, 2008) Smith, Kaleigh; Landes, Pierre-Edouard; Thollot, Joelle; Myszkowski, Karol
This paper presents a quick and simple method for converting complex images and video to perceptually accurate greyscale versions. We use a two-step approach first to globally assign grey values and determine colour ordering, then second, to locally enhance the greyscale to reproduce the original contrast. Our global mapping is image independent and incorporates the Helmholtz-Kohlrausch colour appearance effect for predicting differences between isoluminant colours. Our multiscale local contrast enhancement reintroduces lost discontinuities only in regions that insufficiently represent original chromatic contrast. All operations are restricted so that they preserve the overall image appearance, lightness range and differences, colour ordering, and spatial details, resulting in perceptually accurate achromatic reproductions of the colour original.
Articulated Object Reconstruction and Markerless Motion Capture from Depth Video
(The Eurographics Association and Blackwell Publishing Ltd, 2008) Pekelny, Yuri; Gotsman, Craig
We present an algorithm for acquiring the 3D surface geometry and motion of a dynamic piecewise-rigid object using a single depth video camera. The algorithm identifies and tracks the rigid components in each frame, while accumulating the geometric information acquired over time, possibly from different viewpoints. The algorithm also reconstructs the dynamic skeleton of the object, thus can be used for markerless motion capture. The acquired model can then be animated to novel poses. We show the results of the algorithm applied to synthetic and real depth video.
Artificial Mosaics by Gradient Vector Flow
(The Eurographics Association, 2008) Battiato, Sebastiano; Blasi, Gianpiero Di; Gallo, Giovanni; Guarnera, Giuseppe Claudio; Puglisi, Giovanni; Katerina Mania and Eric Reinhard
In this paper a novel approach for artificial mosaic generation is proposed. Gradient Vector Flow computation together with heuristics to maximise the covered mosaic area are used. The high frequency details are managed in a global way allowing to preserve the mosaic-style also for small ones. Experiments and comparisons with previous works confirm the effectiveness of the proposed algorithm.
Augmented Panoramic Video
(The Eurographics Association and Blackwell Publishing Ltd, 2008) Hermans, C.; Vanaken, C.; Mertens, T.; Van Reeth, F.; Bekaert, P.
Many video sequences consist of a locally dynamic background containing moving foreground subjects. In this paper we propose a novel way of re-displaying these sequences, by giving the user control over a virtual camera frame. Based on video mosaicing, we first compute a static high quality background panorama. After segmenting and removing the foreground subjects from the original video, the remaining elements are merged into a dynamic background panorama, which seamlessly extends the original video footage. We then re-display this augmented video by warping and cropping the panorama. The virtual camera can have an enlarged field-of-view and a controlled camera motion. Our technique is able to process videos with complex camera motions, reconstructing high quality panoramas without parallax artefacts, visible seams or blurring, while retaining repetitive dynamic elements.
Automatic Conversion of Mesh Animations into Skeleton-based Animations
(The Eurographics Association and Blackwell Publishing Ltd, 2008) De Aguiar, Edilson; Theobalt, Christian; Thrun, Sebastian; Seidel, Hans-Peter
Recently, it has become increasingly popular to represent animations not by means of a classical skeleton-based model, but in the form of deforming mesh sequences. The reason for this new trend is that novel mesh deformation methods as well as new surface based scene capture techniques offer a great level of flexibility during animation creation. Unfortunately, the resulting scene representation is less compact than skeletal ones and there is not yet a rich toolbox available which enables easy post-processing and modification of mesh animations. To bridge this gap between the mesh-based and the skeletal paradigm, we propose a new method that automatically extracts a plausible kinematic skeleton, skeletal motion parameters, as well as surface skinning weights from arbitrary mesh animations. By this means, deforming mesh sequences can be fully-automatically transformed into fullyrigged virtual subjects. The original input can then be quickly rendered based on the new compact bone and skin representation, and it can be easily modified using the full repertoire of already existing animation tools.
The Beam Radiance Estimate for Volumetric Photon Mapping
(The Eurographics Association and Blackwell Publishing Ltd, 2008) Jarosz, Wojciech; Zwicker, Matthias; Jensen, Henrik Wann
We present a new method for efficiently simulating the scattering of light within participating media. Using a theoretical reformulation of volumetric photon mapping, we develop a novel photon gathering technique for participating media. Traditional volumetric photon mapping samples the in-scattered radiance at numerous points along the length of a single ray by performing costly range queries within the photon map. Our technique replaces these multiple point-queries with a single beam-query, which explicitly gathers all photons along the length of an entire ray. These photons are used to estimate the accumulated in-scattered radiance arriving from a particular direction and need to be gathered only once per ray. Our method handles both fixed and adaptive kernels, is faster than regular volumetric photon mapping, and produces images with less noise.
Boolean Operations for Free-form Models Represented in Geometry Images
(The Eurographics Association, 2008) Fu, Yan; Zhou, Bingfeng; Katerina Mania and Eric Reinhard
We present a Boolean operation algorithm for free-form solid models represented in geometry images. By taking advantage of the regular data organization of geometry images, our algorithm can perform efficient surface division using boundary-fill algorithm which is previously used for digital image processing. A quadtree subdivision scheme is also applied to the geometry images to accelerate the intersection line calculation. Experimental result shows that the algorithm can generate well-defined closed triangle meshes for Boolean operations. The resulted triangle mesh can also be converted into a geometry image for further processing.
Characterization for High Dynamic Range Imaging
(The Eurographics Association and Blackwell Publishing Ltd, 2008) Kim, Min H.; Kautz, Jan
In this paper we present a new practical camera characterization technique to improve color accuracy in high dynamic range (HDR) imaging. Camera characterization refers to the process of mapping device-dependent signals, such as digital camera RAW images, into a well-defined color space. This is a well-understood process for low dynamic range (LDR) imaging and is part of most digital cameras - usually mapping from the raw camera signal to the sRGB or Adobe RGB color space. This paper presents an efficient and accurate characterization method for high dynamic range imaging that extends previous methods originally designed for LDR imaging. We demonstrate that our characterization method is very accurate even in unknown illumination conditions, effectively turning a digital camera into a measurement device that measures physically accurate radiance values - both in terms of luminance and color - rivaling more expensive measurement instruments.
CHC++: Coherent Hierarchical Culling Revisited
(The Eurographics Association and Blackwell Publishing Ltd, 2008) Mattausch, Oliver; Bittner, Jiri; Wimmer, Michael
We present a new algorithm for efficient occlusion culling using hardware occlusion queries. The algorithm significantly improves on previous techniques by making better use of temporal and spatial coherence of visibility. This is achieved by using adaptive visibility prediction and query batching. As a result of the new optimizations the number of issued occlusion queries and the number of rendering state changes are significantly reduced. We also propose a simple method for determining tighter bounding volumes for occlusion queries and a method which further reduces the pipeline stalls. The proposed method provides up to an order of magnitude speedup over the previous state of the art. The new technique is simple to implement, does not rely on hardware calibration and integrates well with modern game engines.
Compensation of the Light Attenuation with Depth of Images Captured by a Confocal Microscope Using a MRF Deformation Model and Graph Cuts
(The Eurographics Association, 2008) Capek, Martin; Michalek, Jan; Janacek, Jiri; Kubinova, Lucie; Hana, Karel; Smrcka, Pavel; Katerina Mania and Eric Reinhard
We study series of fluorescent optical sections, i.e. three-dimensional (3D) biomedical images, captured by a confocal laser scanning microscope (CLSM). Fluorescent image intensities of optical sections from deep layers of the specimen are often darker than intensities of sections from the top layers due to absorption and scattering of both excitation and fluorescent light. To solve this problem we apply a Markov Random Field (MRF) model including an efficient deformation model for tracking structures within the 3D images for computation of optical flow. We approach the corresponding optimization problem by the graph cuts. Image intensities of optical sections are recomputed according to the found optical flow, since the flow gives us evaluation of their proper brightness. Finally, the light attenuation with depth is compensated by matching accumulative histograms of optical sections of the original series with respect to optical sections improved by the optical flow. By this approach we obtain an algorithm that is less sensitive to changes of structures within series (especially to their enlargement and diminishing) than algorithms based purely on histogram matching, warping or equalization.
Computer Graphics Curriculum: a Programming Approach
(The Eurographics Association, 2008) Sobczyk, Dominique; Touzeau, Marie-Solange; Bourdin, Jean-Jacques; Steve Cunningham and Lars Kjelldahl
At University Paris 8 the computer science curriculum is focused on programming as a good technique to improve the skills of students and to improve the success of studies. It has been reinforced when France adopted the Bologna requirements. This approach is well adapted to our computer graphics courses. The results of these courses are discussed.
Computer Graphics: Problem Based Learning and Interactive Embodied Pedagogical Agents
(The Eurographics Association, 2008) Seron, Francisco; Cerezo, Eva; Baldassarri, Sandra; Steve Cunningham and Lars Kjelldahl
This paper focuses on the use of new tools in order to improve the learning of Computer Graphics, in particular of some aspects that have been detected as specially difficult by the students. Within this context, this paper explores the union of two areas: the educational strategy named Problem-Based Learning (PBL) and the use of interactive embodied pedagogical agents (IEPAs) for education and training tasks. By combining these ideas, we obtain an interactive learning environment created to improve student's learning capabilities. From the PBL point of view, the real problem proposed to the students consists in the development of their own viewing system. While for introducing IEPAs we've developed a powerful engine, called Maxine, that enables the management of 3D environments with special emphasis in the use of embodied animated agents. The engine, based on open source libraries, allows emotional and multimodal interaction with the user in real-time: via text, voice, images, animation (facial expression, lip-synch, body gestures) and the choice of the answers. By carefully orchestrating both ideas the students are encouraged to care more about their own progress, convey the enthusiasm in the learner for the subject matter and simply make learning more fun. Evaluations already done to the students show promising results.
Conformal Flattening by Curvature Prescription and Metric Scaling
(The Eurographics Association and Blackwell Publishing Ltd, 2008) Ben-Chen, Mirela; Gotsman, Craig; Bunin, Guy
We present an efficient method to conformally parameterize 3D mesh data sets to the plane. The idea behind our method is to concentrate all the 3D curvature at a small number of select mesh vertices, called cone singularities, and then cut the mesh through those singular vertices to obtain disk topology. The singular vertices are chosen automatically. As opposed to most previous methods, our flattening process involves only the solution of linear systems of Poisson equations, thus is very efficient. Our method is shown to be faster than existing methods, yet generates parameterizations having comparable quasi-conformal distortion.
Contact Skinning
(The Eurographics Association, 2008) Duriez, Christian; Courtecuisse, Hadrien; Alcalde, Juan-Pablo de la Plata; Bensoussan, Pierre-Jean; Katerina Mania and Eric Reinhard
In this paper, we propose a new approach to model interactions through a skinning method. Skinning is a frequently used technique to animate a mesh based on skeleton motion. In the case of a hand motion sequence used to manipulate and grasp virtual objects, it is essential to accurately represent the contact between the virtual objects and the animated hand. To improve the level of realism, our approach allows to accurately solve friction contact laws. In addition, contact constraints defined on the surface of the hand can be applied onto the skeleton to produce plausible motion. We illustrate our work through two examples: the real-time simulation of a grasping task and a character animation based on motion capture.

Browse

Browsing EG2008 by Title

Results Per Page

Sort Options