CEIG2022

Permanent URI for this collection

XXXI Spanish Computer Graphics Conference, Vic, Spain - July 6 - 8, 2022
CAD, Simulation, and Grasping
Simulation Based Initial Feasibility Analysis Pipeline for Small-sized Part Picking
Iñigo Mendizabal-Arrieta, Antonio Tammaro, Marco Ojer, and Xiao Lin
Synthesis of Reeb Graph and Morse Operators from Level Sets of a Boundary Representation
Juan Pareja-Corcho, Diego Montoya-Zapata, Carlos Cadavid, Aitor Moreno, Jorge Posada, Ketzare Arenas-Tobon, and Oscar Ruiz-Salguero
Cylindrical Transform Slicing of Revolute Parts with Overhangs for Laser Metal Deposition
Diego Montoya-Zapata, Aitor Moreno, Igor Ortiz, Oscar Ruiz-Salguero, and Jorge Posada
Modeling
A Modular Authoring Tool for Atmospheric Cloud Modelling
Darío Rodríguez-Hernández and Ignacio García-Fernández
Reusable Procedural Building Parts
Alejandro Arangua, Gustavo Patow, and Gonzalo Besuievsky
Guided Modeling of Natural Scenarios: Vegetation and Terrain
José Antonio Collado, Alfonso López, Juan Roberto Jiménez Pérez, Lidia M. Ortega, Francisco R. Feito, and Juan M. Jurado
Kalathos+: Construcción de datasets para la clasificación automática de fragmentos de vasijas cerámicas de torno
Rafael J. Segura, Antonio J. Rueda, Carlos J. Ogáyar, José M. Fuertes, Ángel L. García-Fernández, Manuel J. Lucena, Alfonso López, Isabel Moreno, and Manuel Molinos
VR and Visualization
Interactive Visualization of Historical Fabrics at Yarn Level using Sphere Tracing
Manolo Pérez-Aixendri, Jesús Gimeno, Cristina Portalés, and Pablo Casanova-Salas
NeodiagVR: Virtual Reality Apgar test environment
Lucas Ferry, Jesús Gimeno, Francisco Javier Estañ, Francisco Núñez, Evelin Balaguer, Marcos Fernández, and Cristina Portalés
Development of a Node-Based Material Editor
Luciano Suaya Leiro and Marc Garrigó
Image Understanding, Computer Vision, and Video analytics
DriveRNN: Predicting Drivers' Attention with Deep Recurrent Networks
Blanca Lasheras-Hernandez, Belen Masia, and Daniel Martin

BibTeX (CEIG2022)
@inproceedings{
10.2312:ceig.20221140,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
Synthesis of Reeb Graph and Morse Operators from Level Sets of a Boundary Representation}},
author = {
Pareja-Corcho, Juan
and
Montoya-Zapata, Diego
and
Cadavid, Carlos
and
Moreno, Aitor
and
Posada, Jorge
and
Arenas-Tobon, Ketzare
and
Ruiz-Salguero, Oscar
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221140}
}
@inproceedings{
10.2312:ceig.20222012,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Serrano, Ana
and
Posada, Jorge
}, title = {{
CEIG 2022: Frontmatter}},
author = {
Serrano, Ana
and
Posada, Jorge
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20222012}
}
@inproceedings{
10.2312:ceig.20221139,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
Simulation Based Initial Feasibility Analysis Pipeline for Small-sized Part Picking}},
author = {
Mendizabal-Arrieta, Iñigo
and
Tammaro, Antonio
and
Ojer, Marco
and
Lin, Xiao
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221139}
}
@inproceedings{
10.2312:ceig.20221141,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
Cylindrical Transform Slicing of Revolute Parts with Overhangs for Laser Metal Deposition}},
author = {
Montoya-Zapata, Diego
and
Moreno, Aitor
and
Ortiz, Igor
and
Ruiz-Salguero, Oscar
and
Posada, Jorge
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221141}
}
@inproceedings{
10.2312:ceig.20221142,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
A Modular Authoring Tool for Atmospheric Cloud Modelling}},
author = {
Rodríguez-Hernández, Darío
and
García-Fernández, Ignacio
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221142}
}
@inproceedings{
10.2312:ceig.20221144,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
Guided Modeling of Natural Scenarios: Vegetation and Terrain}},
author = {
Collado, José Antonio
and
López, Alfonso
and
Pérez, Juan Roberto Jiménez
and
Ortega, Lidia M.
and
Jurado, Juan M.
and
Feito, Francisco
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221144}
}
@inproceedings{
10.2312:ceig.20221143,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
Reusable Procedural Building Parts}},
author = {
Arangua, Alejandro
and
Patow, Gustavo
and
Besuievsky, Gonzalo
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221143}
}
@inproceedings{
10.2312:ceig.20221147,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
NeodiagVR: Virtual Reality Apgar test environment}},
author = {
Ferry, Lucas
and
Gimeno, Jesús
and
Estañ, Francisco Javier
and
Núñez, Francisco
and
Balaguer, Evelin
and
Fernández, Marcos
and
Portalés, Cristina
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221147}
}
@inproceedings{
10.2312:ceig.20221145,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
Kalathos+: Construcción de datasets para la clasificación automática de fragmentos de vasijas cerámicas de torno}},
author = {
Segura, Rafael J.
and
Rueda, Antonio J.
and
Ogáyar, Carlos J.
and
Fuertes, José M.
and
García-Fernández, Ángel L.
and
Lucena, Manuel J.
and
López, Alfonso
and
Moreno, Isabel
and
Molinos, Manuel
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221145}
}
@inproceedings{
10.2312:ceig.20221146,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
Interactive Visualization of Historical Fabrics at Yarn Level using Sphere Tracing}},
author = {
Pérez-Aixendri, Manolo
and
Gimeno, Jesús
and
Portalés, Cristina
and
Casanova-Salas, Pablo
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221146}
}
@inproceedings{
10.2312:ceig.20221148,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
Development of a Node-Based Material Editor}},
author = {
Leiro, Luciano Suaya
and
Garrigó, Marc
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221148}
}
@inproceedings{
10.2312:ceig.20221149,
booktitle = {
Spanish Computer Graphics Conference (CEIG)},
editor = {
Posada, Jorge
and
Serrano, Ana
}, title = {{
DriveRNN: Predicting Drivers' Attention with Deep Recurrent Networks}},
author = {
Lasheras-Hernandez, Blanca
and
Masia, Belen
and
Martin, Daniel
}, year = {
2022},
publisher = {
The Eurographics Association},
ISBN = {978-3-03868-186-1},
DOI = {
10.2312/ceig.20221149}
}

Browse

Recent Submissions

Now showing 1 - 12 of 12
  • Item
    Synthesis of Reeb Graph and Morse Operators from Level Sets of a Boundary Representation
    (The Eurographics Association, 2022) Pareja-Corcho, Juan; Montoya-Zapata, Diego; Cadavid, Carlos; Moreno, Aitor; Posada, Jorge; Arenas-Tobon, Ketzare; Ruiz-Salguero, Oscar; Posada, Jorge; Serrano, Ana
    In the context of Industrie 4.0, it is necessary for several applications, to encode characteristics of a Boundary Representation of a manifold M in an economical manner. Two related characterizations of closed B-Reps (and the solid they represent) are (1) medial axis and (2) Reeb Graph. The medial axis of a solid region is a non-manifold mixture of 1-simplices and 2- simplices and it is expensive to extract. Because of this reason, this manuscript concentrates in the work-flow necessary to extract the Reeb Graph of the B-Rep. The extraction relies on (a) tests of geometric similarities among slices of M and (b) characterization of the topological transitions in the slice sequence of M. The process roughly includes: (1) tilt of the B-Rep to obtain an unambiguous representation of the level sets ofM,(2) identification and classification of the topological transitions that arise between consecutive level sets, (3) sample of Reeb graph vertices inside the material regions defined by the level sets, (4) creation of Reeb graph edges based on the type of topological transition and the 2D similarity among material regions of consecutive levels. Although the Reeb Graph is a topological construct, geometrical processing is central in its synthesis and compliance with the Nyquist-Shannon sampling interval is crucial for its construction. Future work is needed on the extension of our methodology to account for manifolds with internal voids or nested solids.
  • Item
    CEIG 2022: Frontmatter
    (The Eurographics Association, 2022) Serrano, Ana; Posada, Jorge; Serrano, Ana; Posada, Jorge
  • Item
    Simulation Based Initial Feasibility Analysis Pipeline for Small-sized Part Picking
    (The Eurographics Association, 2022) Mendizabal-Arrieta, Iñigo; Tammaro, Antonio; Ojer, Marco; Lin, Xiao; Posada, Jorge; Serrano, Ana
    Random bin picking is still one of the main tasks for robotics in the current days. When the environment is very cluttered, the calculation of grasping positions can be highly demanding in terms of time and computing power. To ease the computation load, some parts arranging operations can be performed before the segmentation stage. For instance, for small and light parts, a feeder-vibrating table system can be used to separate the components, allowing them to be easily grasped, and increasing the overall performance of the solution. However, as the geometry and requirements for piece type are different, one or more feasibility tests need to be done for each case. These analyses are usually very time and cost intensive and require the use of expensive hardware such as robots, grippers, and prototype cells. The use of virtual reproductions of the environment like digital twins or physical-based simulations could help reduce the time and effort spent on designing the settings, nevertheless, their correct configuration is not trivial. This paper presents a simulation based analysis method for picking small-sized parts. It aims to supply the tools and define a streamlined procedure for efficient feasibility testing. Those concepts are applied in a specific bin picking scenario of multiple small electronic components. For each part type, a set of case-specific initial and boundary conditions are taken into account, then a series of performance metrics for both bin and vibrating table part picking are computed. The obtained information is decisive to make strategic decisions regarding the hardware requirements, the profitability, and the success probability of the project.
  • Item
    Cylindrical Transform Slicing of Revolute Parts with Overhangs for Laser Metal Deposition
    (The Eurographics Association, 2022) Montoya-Zapata, Diego; Moreno, Aitor; Ortiz, Igor; Ruiz-Salguero, Oscar; Posada, Jorge; Posada, Jorge; Serrano, Ana
    In the context of Laser Metal Deposition (LMD), temporary support structures are needed to manufacture overhanging features. In order to limit the need for supports, multi-axis machines intervene in the deposition by sequentially repositioning the part. Under multi-axis rotations and translations, slicing and toolpath generation represent significant challenges. Slicing has been partially addressed by authors in multi-axis LMD. However, tool-path generation in multi-axis LMD is rarely touched. One of the reasons is that the required slices for LMD may be strongly non-developable. This fact produces a significant mismatch between the tool-path speeds and other parameters in Parametric space vs. actual Euclidean space. For the particular case of developable slices present in workpieces with cylindrical kernel and overhanging neighborhoods, this manuscript presents a methodology for LMD tool path generation. Our algorithm takes advantage of existing cylindrical iso-radial slicing by generating a path in the (?, z) parameter space and isometrically translating it into the R3 Euclidean space. The presented approach is advantageous because it allows the path-planning of complex structures by using the methods for conventional 2.5-axis AM. Our computer experiments show that the presented approach can be effectively used in manufacturing industrial/mechanical pieces (e.g., spur gears). Future work includes the generation of the machine g-code for actual LMD equipment.
  • Item
    A Modular Authoring Tool for Atmospheric Cloud Modelling
    (The Eurographics Association, 2022) Rodríguez-Hernández, Darío; García-Fernández, Ignacio; Posada, Jorge; Serrano, Ana
    Modelling of atmospheric effects and, in particular, of clouds is a recurrent topic in computer graphics. Achieving realistic results poses a great challenge, and manual modelling of such complex structures is unfeasible in production. The use of procedural techniques, either through simulation or heuristic methods, is, thus, frequent. In this work we propose a model that allows atmospheric cloud modelling with small computational effort and a good degree of control by the modeller, speeding up the artistic process. The model is designed hierarchically, can be extended easily due to its modular structure and it allows an intuitive control through a graphical user interface. The tests show a variety of effects that can be generated, and the influence of the different parameters on the render time of the final scene.
  • Item
    Guided Modeling of Natural Scenarios: Vegetation and Terrain
    (The Eurographics Association, 2022) Collado, José Antonio; López, Alfonso; Pérez, Juan Roberto Jiménez; Ortega, Lidia M.; Jurado, Juan M.; Feito, Francisco; Posada, Jorge; Serrano, Ana
    The generation of realistic natural scenarios is a longstanding and ongoing challenge in Computer Graphics. LiDAR (Laser Imaging Detection and Ranging) point clouds have been gaining interest for the representation and analysis of real-world scenarios. However, the output of these sensors is conditioned by several parameters, including, but not limited to, distance to scanning target, aperture angle, number of laser beams, as well as systematic and random errors for the acquisition process. Hence, LiDAR point clouds may present inaccuracies and low density, thus hardening their visualization. In this work, we propose reconstructing the surveyed environments to enhance the point cloud density and provide a 3D representation of the scenario. To this end, ground and vegetation layers are detected and parameterized to allow their reconstruction. As a result, point clouds of any required density can be modeled, as well as 3D realistic natural scenarios that may lead to procedural generation through their parameterization.
  • Item
    Reusable Procedural Building Parts
    (The Eurographics Association, 2022) Arangua, Alejandro; Patow, Gustavo; Besuievsky, Gonzalo; Posada, Jorge; Serrano, Ana
    With the increase in popularity of procedural urban modeling for film, TV, and interactive entertainment, an urgent need for editing tools to support procedural content creation has become apparent. In this paper, we present an end-to-end system for creating a library of reusable procedural parts in a rule-based setting to address this need. No trivial extension exists to perform this action in a way such that the resulting ruleset is ready for production. For procedural reusable parts, we need to handle the rulesets extracted from the source graphs, and later on, merge them with a target graph to obtain a final consistent ruleset. As one of the main contributions of our system, we introduce a library of reusable parts that could be seamlessly glued to other graphs and obtain consistent new procedural buildings. Hence, we focus on intuitive and minimal user interaction, and our editing operations perform interactively to provide immediate feedback.
  • Item
    NeodiagVR: Virtual Reality Apgar test environment
    (The Eurographics Association, 2022) Ferry, Lucas; Gimeno, Jesús; Estañ, Francisco Javier; Núñez, Francisco; Balaguer, Evelin; Fernández, Marcos; Portalés, Cristina; Posada, Jorge; Serrano, Ana
    Owing to the lack of accessibility of postpartum rooms nowadays, which are needed to teach the correct assessment of newborn health status to medical students, virtual reality and simulation are increasingly used for teaching and assessing visual perception tests that evaluate the condition of the newborn. This paper aims to explain the operation of the Apgar test evaluation simulator in a virtual reality environment. This virtual environment can be manipulated externally from a web browser to visualize and control the course of the simulation in real-time. In addition, an offline version would allow initialization and visualization of the Apgar test parameters without the need for synchronization with the virtual environment.
  • Item
    Kalathos+: Construcción de datasets para la clasificación automática de fragmentos de vasijas cerámicas de torno
    (The Eurographics Association, 2022) Segura, Rafael J.; Rueda, Antonio J.; Ogáyar, Carlos J.; Fuertes, José M.; García-Fernández, Ángel L.; Lucena, Manuel J.; López, Alfonso; Moreno, Isabel; Molinos, Manuel; Posada, Jorge; Serrano, Ana
    En los últimos años las técnicas de aprendizaje profundo se han convertido en una poderosa alternativa a técnicas clásicas de aprendizaje automático orientadas a tareas de clasificación. Esta tecnología se ha aplicado con gran éxito en diversos campos, si bien es necesaria la existencia de un conjunto de datos etiquetados muy grande para afrontar el entrenamiento de las mismas. En este trabajo se presenta un framework para la generación automática de fragmentos de vasijas de cerámica de torno, convenientemente etiquetados, de manera que permitan el entrenamiento de CNNs para la clasificación de dichos fragmentos, y su posterior utilización en tareas de reconstrucción.
  • Item
    Interactive Visualization of Historical Fabrics at Yarn Level using Sphere Tracing
    (The Eurographics Association, 2022) Pérez-Aixendri, Manolo; Gimeno, Jesús; Portalés, Cristina; Casanova-Salas, Pablo; Posada, Jorge; Serrano, Ana
    In this paper we present preliminary results of a new approach for interactive visualization of historical fabrics at yarn level based on models using Signed Distance Functions. They are compared with the results of Virtual Loom, an interactive application for rendering historical fabrics from the 15th to the 19th century, resulting from the European SilkNow project [PSA*18]. Yarns used on these fabrics has an special complexity due to a metallic cover that appears in some elements of the fabric. This new approach is based on rendering using Sphere Tracing. We will propose a signed distance function that allows both the visualization of a single yarn and a complete fabric in real time.
  • Item
    Development of a Node-Based Material Editor
    (The Eurographics Association, 2022) Leiro, Luciano Suaya; Garrigó, Marc; Posada, Jorge; Serrano, Ana
    Materials systems are an important element within the development of a renderer for an application such as a video game. Nowadays, the method to build a graphic style for a product involving a real-time engine implies a rendering system supporting a solid and concise materials system, as those well-established in real-time engines such as Unreal or Unity. This study presents an open-source application to serve as an editor of materials consisting of a modern real-time renderer. The application consists of a basic OpenGL real-time rendering engine to visualise 3D geometry and its appearance through the support of a node-based material editor to assemble materials in an intuitive and simple manner, without the use of programming and little technical knowledge. The culmination of the project and the achievement of its objectives was satisfactory. We concluded that this work can be used as a reference to understand real-time material systems and renderers and its state of the art in the video games industry.
  • Item
    DriveRNN: Predicting Drivers' Attention with Deep Recurrent Networks
    (The Eurographics Association, 2022) Lasheras-Hernandez, Blanca; Masia, Belen; Martin, Daniel; Posada, Jorge; Serrano, Ana
    Lately, the automotive industry has experienced a significant development led by the ambitious objective of creating an autonomous vehicle. This entails understanding driving behaviors in different environments, which usually requires gathering and analyzing large amounts of behavioral data from many drivers. However, this is usually a complex and time-consuming task, and data-driven techniques have proven to be a faster, yet robust alternative to modeling drivers' behavior. In this work, we propose a deep learning approach to address this challenging problem. We resort to a novel convolutional recurrent architecture to learn spatio-temporal features of driving behaviors based on RGB sequences of the environment in front of the vehicle. Our model is able to predict drivers' attention in different scenarios while outperforming competing works by a large margin.